SAE AMS5659 Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr 4.5Ni 0.30Cb 3.5Cu, Consumable
时间:2024-05-20 09:01:36 来源: 标准资料网 作者：标准资料网 阅读：8333
Product Code:SAE AMS5659
Title:Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr 4.5Ni 0.30Cb 3.5Cu, Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope: This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, extrusions, and stock for forging, flash welded rings, or extruding. These products have been used typically for parts requiring corrosion resistance and high strength up to 600 degrees F (316 degrees C) with good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions. Alloy: 15-5PH UNS Number: S15500
- 上一篇：SAE AMS5659 Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu,
- 下一篇：SAE AMS4944 Titanium Alloy, Seamless, Hydraulic Tubing 3.0Al - 2.5V Cold Worked, Stress Relieved
MIL-E-23765B, MILITARY SPECIFICATION: ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, GENERAL SPECIFICATION FOR (22 AUG 1985)., This specification covers the general requirements for solidbare and alloyed cored welding electrode and cut-length rods made from carbonsteel, low alloy steel, chromium-nickel steel, nickel base and copper basealloys, aluminum, and aluminum alloys designed for use with the gas metal-arc(GMA), gas tungsten-arc (GTA), and the submerged-arc welding (SAW) processes,as applicable.【英文标准名称】:Fireprotection-Automaticsprinklersystems-Part8:Requirementsandtestmethodsforpre-actiondryalarmvalves
【原文标准名称】:消防.自动喷水灭火系统.第8部分:预动干式报警阀的要求和试验方法
【标准号】:ISO6182-8-2006
【标准状态】:现行
【国别】:国际
【发布日期】:2006-03
【实施或试行日期】:
【发布单位】:国际标准化组织(ISO)
【起草单位】:ISO/TC21
【标准类型】:()
【标准水平】:()
【中文主题词】:控制;定义;消防系统;防火安全;消防喷水器;作标记;规范(验收);试验;公差(测量);阀门;喷水;水阀
【英文主题词】:Control;Definition;Definitions;Fireprotectionsystems;Firesafety;Firesprinklers;Marking;Specification(approval);Testing;Tolerances(measurement);Valves;Waterspray;Watervalves
【摘要】:ThispartofISO6182specifiesperformancerequirements,methodsoftestandmarkingrequirementsforpre-actiondryalarmvalvesandmanufacturers’specifiedrelevanttrimusedinnon-interlockpre-actionautomaticfireprotectionsystems.(See3.24fortheprinciplemodesofoperationofpre-actiondryalarmvalves.)Performanceandtestrequirementsforotherauxiliarycomponentsorattachmentstopre-actiondryvalvesarenotcoveredbythispartofISO6182.
【中国标准分类号】:C84
【国际标准分类号】:13_220_20
【页数】:22P;A4
【正文语种】:英语